Inline Oxygen Meters
Hygienic optical dissolved oxygen measurement for real-time monitoring directly in the production line. Explore Oxy 5100 measuring ranges, communication configurations and Tetra Pak Part Number references for technical identification and sourcing support.
Real-time oxygen monitoring directly in beverage production
Oxygen content is an important parameter for beverage taste and shelf life. The Oxy 5100 inline oxygen sensor measures dissolved oxygen directly in the production line and provides continuous process measurement throughout production.
The instrument is designed for hygienic applications and uses optical dissolved oxygen measurement. Two measuring-range families are shown in the source reference: a wide-range version and a trace-range version.
Why dissolved oxygen measurement matters
Continuous dissolved oxygen measurement gives operators direct visibility of oxygen levels during production and helps compare process conditions with expected product requirements.
Product Quality
Oxygen content is identified in the reference as an important parameter for the taste of beverages.
Shelf Life
Monitoring dissolved oxygen supports control of a parameter directly related to beverage shelf life.
Real-Time Monitoring
Inline measurement provides continuous information directly from the production process instead of relying only on offline sampling.
Optical oxygen measurement for hygienic applications
The benefits below are based on the technical information shown in the supplied Oxy 5100 component reference.
Optical dissolved oxygen measurement intended for hygienic applications.
Designed to provide process measurements comparable to laboratory results.
The source highlights simplified sensor-cap replacement.
Predictable sensor-cap exchange supported by a lifetime estimator.
Designed to return quickly to operation after hot CIP or hot-water rinsing.
Provides dissolved oxygen data directly throughout the production process.
Oxy 5100 reference specifications
The source identifies two Varivent N configurations with different measurement ranges while retaining the same general installation and temperature references.
Oxy 5100
Inline optical dissolved oxygen meter for hygienic beverage-process applications, available in wide-range and trace-range configurations.
Two Oxy 5100 measuring-range families
Selecting the correct range is the first step in matching the installed instrument to the correct Tetra Pak Part Number.
0…24 ppm
Wide-range Oxy 5100 version with Varivent N connection and four communication or output configurations.
0…2000 ppb
Trace-range Oxy 5100 version with Varivent N connection and four communication or output configurations.
Oxy 5100 Tetra Pak Part Numbers
The measuring range, denomination, dimensions and Tetra Pak Part Number relationships below are preserved from the supplied source reference.
Oxy 5100 — Wide Range 0…24 ppm
Varivent N| Description | Denomination | A | B | Tetra Pak Part Number |
|---|---|---|---|---|
|
Wide range 0…24 ppm Varivent N connection |
Profinet IO without display | 149 | 163.4 | 90532-3731 |
|
Wide range 0…24 ppm Varivent N connection |
Profinet IO with display | 149 | 163.4 | 90532-3732 |
|
Wide range 0…24 ppm Varivent N connection |
Ethernet IP with display | 149 | 163.4 | 90532-3733 |
|
Wide range 0…24 ppm Varivent N connection |
2× 4 to 20 mA analog with display | 149 | 163.4 | 90532-3734 |
Oxy 5100 — Trace Range 0…2000 ppb
Varivent N| Description | Denomination | A | B | Tetra Pak Part Number |
|---|---|---|---|---|
|
Trace range 0…2000 ppb Varivent N connection |
Profinet IO without display | 149 | 163.4 | 90532-3735 |
|
Trace range 0…2000 ppb Varivent N connection |
Profinet IO with display | 149 | 163.4 | 90532-3736 |
|
Trace range 0…2000 ppb Varivent N connection |
Ethernet IP with display | 149 | 163.4 | 90532-3737 |
|
Trace range 0…2000 ppb Varivent N connection |
2× 4 to 20 mA analog with display | 149 | 163.4 | 90532-3738 |
Identifying the correct Oxy 5100 configuration
The model designation alone is not sufficient for exact replacement. The measuring range and complete interface configuration should be checked against the installed instrument.
Confirm the Measuring Range
Identify whether the application requires the wide-range 0…24 ppm version or the trace-range 0…2000 ppb version.
Identify the Interface
Confirm Profinet IO, Ethernet IP or 2× 4 to 20 mA analog output.
Check the Display
For Profinet IO, verify whether the required configuration is with or without display before matching the Part Number.
Inline dissolved oxygen measurement in beverage processing
The Oxy 5100 is intended for real-time dissolved oxygen measurement where product quality and oxygen control are important during production.
Beverage Production
Continuous oxygen monitoring directly in beverage production lines.
Product Quality Monitoring
Measurement of an important process parameter related to beverage taste.
Shelf-Life Control
Supports monitoring of oxygen content as a parameter relevant to shelf life.
Low-Oxygen Processes
Trace-range measurement is available for applications requiring ppb-level monitoring.
Production-Line Integration
Varivent N connection and multiple communication options support hygienic inline installation.
Automated Process Monitoring
Profinet IO, Ethernet IP and analog configurations provide options for integration with control systems.
Oxy 5100 identification and sourcing
What does the Oxy 5100 measure?
It measures dissolved oxygen directly in the production line using an optical measurement principle.
Which measuring ranges are listed?
The supplied reference shows a wide range of 0…24 ppm and a trace range of 0…2000 ppb.
Which interfaces are available?
The reference includes Profinet IO, Ethernet IP and 2× 4 to 20 mA analog configurations.
Are all Oxy 5100 Part Numbers interchangeable?
No. Part Numbers differ according to measuring range, communication interface and display configuration.
What should I provide for replacement identification?
Provide the existing Tetra Pak Part Number, measuring range, full denomination and any available equipment identification.
Does LGN Group manufacture these Tetra Pak components?
No. Tetra Pak Part Numbers are shown as OEM references for technical identification and sourcing support.
Need help identifying an Oxy 5100 oxygen meter?
Send LGN Group the Tetra Pak Part Number, measuring range, denomination and available equipment information. Our team can assist with technical identification and sourcing of the required process instrument.