Analysis Other
Analysis
Analysis Transmitters: Liquiline CM44x Series
Application
The **Liquiline CM44x series** are a line of transmitters for **Memosens technology**, utilized in this section of the catalogue. Both rack-mounted and field-mounted (with display) versions are available.
Benefits
- Clever Simplicity: One controller for all parameters and applications, intuitive user interface, automatic sensor recognition, and hot plug & play with pre-calibrated Memosens sensors.
- Highest Flexibility: Universal modules for all parameters minimize spare part stock and allow for easy 1-click extension to up to 8 channels at any time.
- Simple and Safe Commissioning: Convenient setup multiplication to other devices with an SD-Card saves time and minimizes effort.
- Process Control and Safety: Integrated web server allows the operator to remotely view diagnostic data, perform configurations, or access device parameters in any web browser – even via Smartphone.
pH Sensors
Orbipac CPF81D
Application
Orbipac CPF81D is a robust pH sensor suitable for processes in the treatment of industrial water and wastewater.
Benefits
- Suitable for flow and immersion installation.
- Long-term stable: Features a second electrolyte bridge for better protection against electrode poisoning ions such as S²⁻ or CN⁻.
- Robust polymer housing protects against mechanical damage.
- Optional flat membrane suitable for high flow rates and fibrous media.
- Maximum process safety through non-contact inductive signal transmission.
CPS11D
Application
The CPS11D is a glass pH sensor for water treatment in drinking water, cooling water, and well water applications.
Benefits
- Maximum process safety through non-contact, inductive signal transmission.
- Enables predictive maintenance due to storage of sensor and process-specific data.
- Reduced operating costs thanks to minimized process downtime and extended sensor lifetime.
Optical Absorption: OUSAF11
Application
OUSAF11 is a glass-free sensor for the inline detection of changing phases and suspended solids.
Benefits
- Highest safety for your products thanks to glass-free, hygienic design.
- Cost savings and reduced product loss thanks to fast interphase detection.
- Low-maintenance sensor with long service life and stable operation.
- Flexible installation: Sensor features insertion (with Triclamp and Varivent connection) and immersion (with holder and assembly system Flexdip CYA112 and CYH112).
- Robust sensor resists aggressive chemicals and fouling.
- Suitable for Cleaning-in-Place (CIP) and Sterilization-in-Place (SIP).
- FDA and 3-A approval.
Turbidity
ITM-51
Application
Preferred turbidity meter for detection of phase separation like water/milk phase, but also for products like cream and whey.
Benefits
- Compact front flush sensor.
- Temperature range: -10…130 °C (Up to 140 °C max. 120 min for CIP).
- High reproducibility: ≤ 1 % of full scale.
- Selectable output value (%TU, NTU, EBC).
- Measurement range: 200…300,000 NTU equivalent.
Turbimax - CUS51D
Application
Memosens sensor for suspended solids and turbidity measurement in water, wastewater, and utilities.
Benefits
- Fast and easy commissioning: Sensor comes precalibrated and preconfigured ex factory.
- Enables unattended plant operation: Intelligent design enables sophisticated self-cleaning capabilities and minimizes maintenance.
- Perfect process adaptation: Fast sensor positioning with holder and assembly system Flexdip CYA112 and CYH112.
Turbimax - CUS52D
Application
Hygienic Memosens sensor for turbidity measurement in drinking water, process water, and utilities.
Benefits
- Measuring results like in the lab: Highly accurate and reliable monitoring of your water quality – even at the lowest turbidity.
- Turbidity measurement without product loss: Hygienic inline measurement preserves each drop of water in the process.
- Unattended operation: Intelligent design and practical accessories enable sophisticated self-cleaning capabilities and minimize maintenance.
- Smart verification and calibration: Absolutely safe, liquid-free, without Formazin.
- Great flexibility, simple handling: One sensor for all measuring points and all installation environments (inline or immersion).
- Improved process Control: Individually adaptable sensor response time.
- Fast commissioning: Factory calibration and Memosens technology allow plug & play integration into your process.
Nitrate: Viomax - CAS51D
Application
Viomax CAS51D measures nitrate or SAC in drinking water, process water, and wastewater applications, as well as the utilities sector. It is used for organic load or nitrate in inlet and outlet determination of CODeq or TOCeq, monitoring, control, and optimization of treatment processes, and nitrate monitoring in the aeration basin and denitrification stage.
Benefits
- Cost-effective: Easy, chemical-free handling is safe, environmentally friendly, and saves on operational expenditure.
- Extremely fast response time: Measured value processing in the sensor provides reliable real-time process information.
- Fast and easy commissioning: Sensor comes precalibrated and preconfigured ex factory.
- Perfect adaptation to open basins: Fast and flexible sensor positioning with Flexdip CYH112 holder and CYA112 assembly system.
Chlorine: CCS142D
Application
Chloromax CCS142D is the digital, free chlorine sensor for all kinds of water.
Benefits
- Long calibration and maintenance intervals.
- Easy membrane replacement thanks to prefabricated membrane cap.
- Measured values are not affected by conductivity fluctuation.
- Sensor can be installed in flow cell CCA250 or in immersion assemblies.
- Measurement virtually independent of the flow at flow velocities above 30 l/h or ~8 gal/h (CCA250) or above 15 cm/s or ~0.5 ft/s (immersion).
- Maximum process safety through no-contact inductive signal transmission.
Analysis Transmitters Models
| Description | Denomination | Part No |
|---|---|---|
|
CM44P CM44P multi.2x0/4-20mA 2DI 2DO |
||
| CM44P multi.2x0/4-20mA 2DI 2DO | 90524-6671 | |
|
CM442R CM442R multi.2x0/4-20mA 2DI 2DO |
||
| CM442R multi.2x0/4-20mA 2DI 2DO | 90524-6673 | |
| CM442R multi.W/O I/O | 90524-6674 | |
pH Models
| Description | Denomination | Part No |
|---|---|---|
|
CPS11E PH-electrode, CPS11E 1-12pH 120mm |
||
| PH-electrode, CPS11E 1-12pH 120mm | 90533-0641 | |
Optical Absorption Models
| Description | Denomination | Part No |
|---|---|---|
|
OUSAF11 Sensor for CM44P transmitter 3 m cable Connection: Varivent N 0-2.5 AU;(up to 0-5 OD) OPL 5mm |
||
| Sensor for CM44P transmitter | 90524-6666 | |
Turbidity Models
| Description | Denomination | Part No |
|---|---|---|
|
Turbimax CUS51D 3 m cable |
||
| Turbimax CUS51D G1 NPT3/4 | 90524-6669 | |
|
Turbimax CUS52D 3 m cable |
||
| Turbimax CUS52D G1 NPT3/4 | 90524-6670 | |
|
ITM-51 Analog, Compact 18-36V DC, 4-20mA, 4-wire -1-20bar, temp.-10-130deg.C/CIP 140deg.C M12 plug 1.4301, vertical Infrared backscatter method, color independent Optical: Sapphire |
||
| ITM-51 Tri-Cl.1-1/2" w. display | 70000163302 | |
| ITM-51 Tri-Cl.1-1/2" w. long sensor w. display | 90532-7924 | |
| ITM-51 Tri-Cl.2" w. display | 70000164890 | |
| ITM-51 Varivent N w. display | 90532-7926 | |
|
ITM-51 Analog, Remote 18-36V DC, 4-20mA, 4-wire -1-20bar, temp.-10-130deg.C/CIP 140deg.C M12 plug 1.4301, vertical Infrared backscatter method, color independent Optical: Sapphire Cable is not included |
||
| ITM-51 Tri-Cl.1-1/2" w. display | 90532-7922 | |
| ITM-51 Tri-Cl.2" w. display | 90532-7923 | |
|
Cable for remote version 5 meter cable for remote version of ITM-51 |
||
| 5-meter cable | 90526-8294 | |
|
ITM-51 IO-Link, Compact 18-36V DC, IO-Link + 4-20mA, 5-wire -1-20bar, temp.-10-130deg.C/CIP 140deg.C Display, M12 plug 1.4301, vertical Infrared backscatter method, color independent Optical: Sapphire |
||
| ITM-51 Tri-Cl.1-1/2" w display | 70000164615 | |
| ITM-51 Tri-Cl.1-1/2" w. long sensor w/o display | 90532-7925 | |
| ITM-51 Tri-Cl.1-1/2" w/o display | 90532-7920 | |
| ITM-51 Tri-Cl.2" w/o display | 90532-7921 | |
| ITM-51 Varivent N w/o display | 90532-7927 | |
Nitrate Models
| Description | Denomination | Part No |
|---|---|---|
|
Viomax CAS51D UV-range Nitrate clear water 0.01-20mg/l NO3-N or 0.04-80mg/l NO3 |
||
| Viomax CAS51D sensor | 90524-6676 | |
Analysis Accessories
| Description | Denomination | Part No |
|---|---|---|
|
CPA842 Assembly |
||
| Assembly, Unifit CPA842 | 90530-6331 | |
|
CYK10 Measuring cable |
||
| CYK10 Memosens, pH 10m | 90524-6679 | |
| CYK10 Memosens, pH 5m | 90524-6678 | |